Brand:
SS 1-2KVA
Voltage Stabilizer
(Automatic Voltage Regulator)
Protect your equipments from damage. Monitors all incoming elec tricity and cleans out the damaging currents. Ensures that your equipment will receive onl y safe and clean electricity.
Switch on
After equipments is connected to the voltage stabilizer , press the "ON" button.
Switch off
Press the "OFF" button
Overload protection
The power switch will turn of f power when stabilizer is overloaded. (Check your maximum VA load for unit)
Output short protection
When stabilizer becomes shorted the power switch will turn of f power.(must manually turn flip power switch for power)
| Model Name | SS1200 | SS2000 | |
| Topology | Low Frequency / Relay Type | ||
| Maximum Capacity (VA / W) | 1000VA / 500W | 2000VA / 1000W | |
| Wave Form | Sine Wave | ||
| AC INPUT | |||
| Phase | 1Ø2W | ||
| Nominal Input Voltage | 120Vac | ||
| Nominal Input Frequency | 50Hz / 60Hz Auto Sensing | ||
| Input Voltage Range | Rated Voltage ±15% | ||
| AC OUTPUT | |||
| Phase | 1Ø2W | ||
| Nominal Input Voltage | 120Vac | ||
| Output Voltage Regulation | Rated Voltage ±5% | ||
| Nominal Input Frequency | 50Hz / 60Hz Auto Sensing | ||
| Number of Outlets | 6 outlets (US) | ||
| Efficiency | > 95% | ||
| PROTECTION | |||
| Over Current Protection | Circuit Breaker | ||
| Surge Energy Rating | 525 Joules | ||
| ADVANCED WARNINGS / DIAGNOSTICS | |||
| Front Panel | Normal mode / Boost / Bulk | ||
| ENVIRONMENTAL | |||
| Temperature | 0°~40°C / 32°~104°F | ||
| Humidity | 0~95% Non condensing | ||
| HEAT SINK | |||
| Type | Heat Release Apertures | ||
| PHYSICAL | |||
| Dimensions (L×W×H) Physical / Packing |
in | 5.35×4.84×4.02 / 7.67×5.75×4.72 | |
| mm | 136×123×102 / 195×146 ×120 | ||
| Weight Net / Gross |
lbs | 3.5 / 4.0 | 4.0 / 4.4 |
| kg | 1.6 / 1.8 | 1.8 / 2.0 | |