Denso - General Handheld - GT 20Q
Constant toughness even under extreme conditions.GT20 has a highly durable design to withstand strong impact, so there is nothing to worry about if you drop this scanner.GT20 is recommended with confidence even in the case that it is used under severe conditions, such as at dusty or wet locations.GT20 can be used under various types of environment, such as inside cold storage chambers and semi-outdoor areas in plants, expanding the range of use for customers.
The clear advantages of the GT20Q barcode scanner
Unlike its previous versions GT20 and GT15Q, this barcode scanner gives you a much better working ability. And the configuration of the machine brings great benefits as you can see below:
- Reduced impact resistance due to the machine is designed with hard plastic and is supported a little bit more at the reader. This also prevents the device from being scratched
- Wide variety of communication ports, including using Bluetooth for increased mobility if you operate in a larger environment.
- Very strong resistance to external forces affecting the equipment. The impact force is 50 times at 2 meters high, water and dust resistant according to IP65 standard, higher than GT15Q.
- The operating temperature range of the machine is up to a maximum of 50 degrees in non-air-conditioned environments. Combined with the above resistance to this creates a Denso barcode reader that can work in almost any environment in which it is placed.
- The machine can read 2D barcodes, much more than GT20 can only read the previous 1D code.
- The device is also quite light. The Bluetooth version also weighs 230 grams so you won't feel any heavy at all.
| Type | GT20Q-SM(U)(1) | GT20Q-SM(R) | GT20Q-SB | ||
|---|---|---|---|---|---|
| Scanner | Method | Area Sensor | |||
| Readable codes | 2D Code | QR code, Micro QR code, SQRC, iQRcode, Data Matrix (ECC200), PDF417, Micro PDF417, Maxi code, Aztec, GS1 Composite | |||
| Barcodes | EAN-13/8 (JAN-13/8), UPC-A/E, UPC/EAN(with add-on), Interleaved 2 of 5 (ITF), Standard 2of 5 (STF), CODABAR (NW-7), CODE39, CODE93, CODE128, GS1-128 (EAN-128), GS1 Databar (RSS) | ||||
| Minimum resolution | 2D Code | 0.167mm | |||
| Barcodes | 0.125mm | ||||
| Marker | Area guide marker | ||||
| PCS value | not less than 0.30 | ||||
| Angle | ±50° | ||||
| Skew angle | 360° | ||||
| Image capture | BMP, JPEG output, thumbnail view | ||||
| Scanning confirmation | Confirmation LED (Blue, Green, Red), Buzzer (with 3-level volume control and 3-level tone control) | ||||
| Communication interface | Method | USB | RS-232C | Bluetooth®Ver.2.1+ EDR based class 2 | |
| Connector | USB connector(A type) | Dsub-9S | - | ||
| Profile | - | - | SPP, HID | ||
| Cable | 2m | 2m, 5m | - | ||
| Power | Main battery | Supply from the connection(2) | Directed AC adapter | Exclusive battery | |
| Operating time(3) | - | - | 28 hours | ||
| Environment requirements | Protection rating | IP65 | |||
| Drop resistance(3) | 2.0 m × 60 times on a concrete floor | ||||
| Operating temperature | -20 to 50℃ | ||||
| Operating humidity | 10 to 90% RH (without dews) | ||||
| Weight (excl. cable) | Approx. 180 g(excl. cable) | Approx. 230g(incl. battery) | |||
